T-bolt
- Dimensions per ANSI B18.2.1 or your specification
- Basic clamps and clamp hardware are designed with precision machined T-heads that fit inside routing slots and T-slots, allowing you to easily tighten and customize your own clamps
- Can withstand high-strength torque, and will not easily fall off or over-tighten. Widely used in aluminum alloy, rack assembly and clamping lock, using T-shaped nut, the tightening effect is good.
- Other materials and finishes available.For further information,call or send an information request
| Thread size d | M4 | M5 | M6 | M8 | M10 | M12 | M16 | M20 | M24 | |
| P | Pitch | 0.7 | 0.8 | 1 | 1.25 | 1.5 | 1.75 | 2 | 2.5 | 3 |
|
s | Nominal | 9 | 10 | 13 | 15 | 18 | 22 | 28 | 34 | 43 |
| Maximum value | 9.29 | 10.29 | 13.35 | 15.35 | 18.35 | 22.42 | 28.42 | 34.5 | 43.5 | |
| Minimum value | 8.71 | 9.71 | 12.65 | 14.65 | 17.65 | 21.58 | 27.58 | 33.5 | 42.5 | |
|
ds | Maximum value | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 20 | 24 |
| Minimum value | 3.82 | 4.82 | 5.82 | 7.78 | 9.78 | 11.73 | 15.73 | 19.67 | 23.67 | |
| f | Maximum value | 1 | 1.6 | 1.6 | 1.6 | 2.5 | 2.5 | 2.5 | 2.5 | 4 |
| r | Maximum value | 0.3 | 0.3 | 0.5 | 0.5 | 0.8 | 0.8 | 1.2 | 1.2 | 1.6 |
|
k | Nominal | 3 | 4 | 6 | 6 | 7 | 8 | 10 | 14 | 18 |
| Maximum value | 3.2 | 4.24 | 6.29 | 6.29 | 7.29 | 8.29 | 10.29 | 14.35 | 18.35 | |
| Minimum value | 2.8 | 3.76 | 5.71 | 5.71 | 6.71 | 7.71 | 9.71 | 13.65 | 17.65 | |
